Bestway Flowclear Sandfilter Pumpe 3028L

• Pumpens flowhastighed (pumpens kapacitet): 3.028L/t (800 gal./t)
  Flowhastighed med integreret bassinsystem (systemets flowhastighed): 2.271L/t (600 gal./t)
• Robust, korrosionsbestandig filtertank.
• Ventil med 6 positioner giver nem filterstyring.
• Den øverste flangeklemme kan drejes 360° for hurtig og problemfri installation.
• Letlæst manometer.
• Den medfølgende ChemConnect™ dispenser holder bassinvandet rent og sundt. Dispenserens klorafgivning giver den nødvendige stabile koncentration af klor til den rigtige kemiske balance.
• Med en si til at opfange blade og andre grove urenheder.
• Dette produkt er færdigsamlet og klart til brug for at gøre det nemmere for brugeren.
• Anbefalet slangediameter til dette produkt er 3,2 cm/1.25'’ med det korrekte gevindmål.
• Dette produkt fungerer med den normale standard for sand eller med vores højeffektive Polysphere™ produkt.
• Sand medfølger ikke.
• Påkrævet sandkornsstørrelse: Nr. 20 kiselsand, 0,45-0,85mm, ca. 8,5 kg
• Til brug med bassiner på 1.100-18.100L (300-4.800 gallon)
• Indhold: Et sandfiltersæt, ChemConnect™-dispenser

The Bestway® 3028 L Flowcear™ Sand Filter is a highly efficient and environmentally friendly way to keep clean water flowing through your above ground pool. It’s also far more cost effective than running a traditional filter pump system as the pump uses silica sand instead of a filter cartridge. Where a filter cartridge may need replaced every 2 weeks, silica sand only needs to be changed once every 3 years. The pump works by draining pool water through a hose and into the filtration system. Although water passes through the system with fantastic ease, the silica sand is so compact that it traps dirt and debris. Filtered water is then pumped down a separate hose and into the swimming pool inlet. Separating debris from sand, when the pressure gauge indicates that the corrosion proof tank is full, is a simple case of turning it to its backwash setting. Once it has been separated, a waste hose is attached and the rinse valve is turned, flushing filth and debris to a suitable deposit area. The Sand Filter is compatible with 1,100-18,100 L (300-4,800 gal.) pools. It makes an excellent upgrade to a traditional filter pump and is a fantastic way to enhance your above ground pool.